Inverter Kondicioner, 6000 W ACT60UR4RJC8

The humidity sensor is standard for compact Cassette. In dry mode, the room relative humidity can be displayed by wired controller YXE-E01U(E).

When the ceiling is high, the unit parameters can be set by the wired controller to compensate the installation height. Even in spaces with high ceilings, a comfortable airflow is carried down to the floor level.

When the individual airflow is changed the display of corresponding direction will flash.

In irregular room layouts, branch discharge could come in handy by extending air distribution area to the most awkward corners without additional indoor units.

We can identify the Error code through the panel display. When there is an error, E will light up and the error code will flash. It is easier for us to troubleshoot.

The filter is water-washable. After the cleaning of filter, the grille can be installed in any direction. The grille has no need to be adjusted in multiple units project thanks to special pattern design of hexagons and triangles.

Different from traditional light display, temperature on the LED display panel is easily visible; the display is hidden in OFF mode, and the design is simple and neat.

The cassette adopts a G type design with a larger heat exchange area. Compared with traditional heat exchanger, it is more high-efficient and more power-saving.

The space dislocation design of triangular and hexagonal can achieve the wind-breaking low noise. And this high sense design can match any decoration style.The space dislocation design of triangular and hexagonal improves the wind channel distribution.

HI-NANO can effectively prevent bacteria. Release a large number ion stream , kill and remove bacteria and viruses quickly through the recycle indoor air.

Airflow of 4 areas can be controlled smartly and independently according to the presence of people.In human avoid mode, the airflow of human detected area will come into ceiling airflow, and the airflow of no human detected area just keep the normal airflow.

Independent airflow control perfectly caters to the space structure and feelings of different people.* We can achieve individual airflow control by wired controller YXE-E01U(E) or remote controller RCH-RVD01.

Sensing sensor saving mode ( default: ON )The system will automatically save energy by detecting whether or not people is in the room. And when people return to the room, the system will come back to the setting people leaving.* We can change saving mode to ultra-saving mode by field settings.Sensing sensor ultra-saving mode ( default: OFF )When there are no people in a room, the system stops automatically. * The system automatically saves energy by detecting whether or not the room is occupied.* Based on preset user conditions, the system automatically stops operation if the room is unoccupied.

The swing airflow can widely reach up to 88°.Thanks to wide airflow, we can get the cooling ceiling airflow and strong heating airflow.

Dual sensors smart eye designDual Sensors can work together to detect the presence of people in each of 4 areas. The detective areas can be more than 50% wider than one sensor design. The sensor is based on thermal imaging technology and the detection do not need the large movement of people.* It is recommended to keep ceiling heigh more than 3.5m to reduce the blind areas of the sensors. Thermal infrared sensing imagingAfter comprehensive evaluation of detection delay time, sensor accuracy, personal privacy and size, the dual infrared sensor solution was finally adopted.* Human detection is not possible for the blind area of the sensor. The detection may sometimes be effected by a heat source, window or some device emitting heat.